Travel Command In The Event Of Wind Or Rain Alarm - RADEMACHER ReWiSo Installation And Operating Instructions Manual

i

4. Travel Command in the Event of Wind or Rain Alarm

After setting the running direction, you can now select whether the travel command is
to be temporally limited or continuous in the event of a wind or rain alarm.
If a wind or rain alarm is triggered, the sunshade is retracted. The running command
for the connected drive ends either after 4 minutes or it is maintained continuously as
long as the alarm is signalled.
Press the
Select:
if the travel command is to end after 4 minutes after the alarm
(setting for normal awning or Venetian blind controllers) or
if the travel command is to be maintained continuous after the alarm
(the travel alarm ends as soon as the alarm no longer exists).
Press the SET key to proceed to the next setting step.
key to switch between the displays OFF and ON.
GB
161