Removing The Rollotron Swivel Winder; Standard Duofern (E.g. In The Event Of A Move) - RADEMACHER RolloTron Swivel Winder Standard DuoFern 2510 Translation Of The Original Operating And Assembly Manual

i
18. Removing the RolloTron Swivel Winder Standard DuoFern (e.g. in the event of a move)
1.
Remove the cover plate from the setting buttons.
2.
+ +
AUTO
3.
Fully close the roller shutters.
4.
Continue to press and hold the down button.
5.
In doing so, pull out the belt as far as possible from the
top of the RolloTron Swivel Winder Standard DuoFern.
6.
7.
Press the assembly locking device on the back part and
remove the RolloTron Swivel Winder Standard DuoFern
from the wall bracket by pulling it downwards.
88
Erase all settings.
Simultaneously press and hold the
buttons for 4 seconds.
Remove the mains plug from the
socket and the small appliances plug
from the RolloTron Swivel Winder
Standard DuoFern.
Assembly locking device
EN