Brightness For The Sunshading - RADEMACHER ReWiSo Installation And Operating Instructions Manual

i
A. Brightness for the Sunshading
GB
In the automatic settings, first enter the brightness above which the sunshade
should be extended.
The sun intensity is displayed in kilolux (kLux). The value 1 kLux is achieved even
with an overcast sky, 20 kLux are achieved when the sun is just coming out and 100
kLux are achieved with a cloudless sky at midday.
The default setting for the brightness is 40 kLux.
Adjust the value with (higher) and (lower) or select to deactivate the
function. If is selected, no control by brightness takes place. The following
automatic parameters (sections B to E) are then skipped. In this case the sunshade
can be operated manually and is protected against wind and rain (if the alarm function
has been activated, see sections „F. Wind Alarm" and „G. Rain Alarm").
Press SET to proceed to the setting of the next parameter.
149