Factory Settings; Conduct In The Event Of Power Failure - RADEMACHER Troll Basic 5602 Instruction Manual

i

7.1 Factory Settings

Factory Settings
Automatic mode:
Automatic solar function:
Automatic dusk function:
i

7.2 Conduct in the event of power failure

After a power failure, the timer LED flashed and the timer
stands still.
Data retention following a power failure
All settings (also the configured switching times) are retained
after a power failure.
As soon as the power supply is restored, the opening and closing
times will be executed again, however the times will be delayed
by the duration of the power failure. If required, set the switching
times again if you do not wish to keep the delayed switching
times, see page 38.
22
Off
Off
Off
EN