Details Of Characters Per Line And Character Specifications With Auto Scaling Enabled - Epson TM-T88 Series Technical Reference Manual

Details of Characters Per Line and Character Specifications with Auto Scaling Enabled

Auto scaling automatically reduces print data that is outside the print area for 40/58 mm width paper to the
print area for 40 mm width paper. Details of characters per line and character specifications with auto
scaling enabled are as shown below.
• Enabled only when 40/58 mm width paper is used.
• Enabled/disabled by memory switch 6-8.
MSW 6-8: OFF (40 mm/80 mm)
When using 40 mm width roll paper, received print data is automatically compressed in the vertical and
horizontal directions.
Font A
Compatible
mode
MSW
6-4
TM-T88 series ON
compatible
mode (1)
76
Receipt print data
Specified Print area:
character size 72.0 mm {2.83"}
MSW
Printed characters:
6-5
576 dots
ON Actual size Characters per line: 42
Double width/ Characters per line: 21
Double height
(n × width) × Characters per line:
(m × height) 552 dots ÷ (13 × n)
(double width/
The remainder is
double height
rounded down.
excluded)
("Memory Switch 6" on page
Print data to be scaled down by
auto scaling
Print area:
35.0 mm {1.38"}
Printed characters:
280 dots
*1
Character font: 7 × 17
Characters per line: 40
*1
Character font: 12 × 24
Characters per line: 23
When n and m are both even
values
Character font:
*1
(12 × (n ÷ 2)) × (24 × (m ÷ 2))
Characters per line:
280 dots ÷ (12 × (n ÷ 2))
The remainder is rounded down.
*2
When neither n or m are even
values
Character font:
(7 × n) × (17 × m)
Characters per line:
280 dots ÷ (7 × n)
The remainder is rounded down.
*2
40)
*2