Control Panel - Epson TM-T88 Series Technical Reference Manual

Control Panel

1 LED
2 (Error) LED
3 (Paper) LED
4 (Feed) button
• Attach the control panel label for vertical installation when vertical installation is used. The
control panel label for vertical installation is upside down. (
24 )
• The Feed button is also located inside the roll paper cover. (See
page 52)
1
2
3
4
• On when the power supply is on.
• Off when the power supply is off.
• Flashes during the network startup process after power-on and power-off
standby status, and while updating firmware.
• Lights or flashes when the printer is offline.
• Lights after the power is turned on or after a reset (offline). Automatically
goes out after a while to indicate that the printer is ready.
• Lights or flashes when an error occurs. (For information about the indica-
tion patterns, see "Status and Errors" on page 18
• Off when the printer is in standard mode (online).
• Lights when there is no more roll paper.
• Flashes to prompt the user to operate the Feed button.
68* model only: Flashes to prompt the user to remove the issued paper
and to operate the Feed button.
Press this button to feed the roll paper by one line. Hold down this button to
feed the roll paper continuously.
When using liner-free label paper, and while waiting for the issued paper to
be removed (for 68* model only), the button operation is disabled.
Chapter 1 Product Overview
68* model
1
2
3
4
.)
"Installing the Printer" on page
"Software Setting Mode" on
1
15