For Safety; Key To Symbols; Warnings - Epson TM-T88 Series Technical Reference Manual

For Safety

Key to Symbols

The symbols in this manual are identified by their level of importance, as defined below. Read the following
carefully before handling the product.
!
WARNING
!
CAUTION

Warnings

!
WARNING
You must follow warnings carefully to avoid serious bodily injury.
Provides information that must be observed to prevent damage to the equipment or
loss of data.
• Possibility of sustaining physical injuries.
• Possibility of causing physical damage.
• Possibility of causing information loss.
Provides information that must be observed to avoid damage to your equipment or a
malfunction.
Provides important information and useful tips.
• Do not cover the printer with cloth or place it in a poorly ventilated location.
• The internal temperature may increase, leading to fire.
• Keep the printer away from volatile substances, such as alcohol and thinner, and
fire. Failure to do so may result in electrical shock or fire.
• Shut down your equipment immediately if it produces smoke, a strange odor, or
unusual noise. Failure to do so may result in electrical shock or fire.
• If an accident occurs, turn off the power immediately and unplug the AC cable.
Then contact qualified service personnel.
• If foreign matter or liquid such as water spills into this equipment, do not continue
to use it. Continued use may result in electrical shock or fire.
• Immediately unplug the equipment and contact qualified service personnel.
• Do not disassemble the printer except for the locations indicated in the manual.
• Never attempt to repair this product yourself. Improper repair work can be
dangerous.
• Do not use the printer in a location where flammable gas, explosive gas, or similar
gas might exist in the air. Do not use aerosol sprayers containing flammable gas
inside or around this product. Doing so may cause fire.
• Do not connect cables in ways other than those indicated in this manual.
• Doing so may lead to fire. Doing so may also damage the connected equipment.
• Do not insert or drop metal or flammable objects into the printer from the
openings. Doing so may result in electrical shock or fire.
• Make sure to use this product at the specified voltage. Failure to do so may result in
fire or electrical shock.
3