Cleaning paper path/autocutter/platen roller
Turn off the printer and open the roll paper cover. Clean the paper dust and adhesive substance
accumulated in the printer with a cotton swab or nonwoven fabric moistened with an alcohol solvent
(ethanol or IPA).
Do not touch the edge of the autocutter blade directly with your finger. Doing so may
WARNING
injure your finger.
Wipe off all glue on the ribs
and edges.
Blow or wipe off the paper
dust around the black mark
sensor.
Platen roller
Autocutter
Paper path
Wipe off all glue on the
touchable area of the
autocutter and the platen
roller.
Chapter 5 Handling
5
69