Part Names; Control Panel (Leds And Buttons) - Epson TM P60II User Manual

Part Names

See Illustrations A and B.

Control Panel (LEDs and Buttons)

The control panel has the power LED, Error LED, Charge LED, Battery LED,
Feed button, and power button. See B 12 through B 17.
Power LED (Green) (B 12)
Power LED
On
Off
Flashing
Error LED (Orange) (B 13)
Printer condition
Power On
Charge LED (Orange) (B 14)
Printer condition
Power On and
battery
installed
Battery LED (Blue) (B 15)
Printer condition
Power On
Power on and
buzzer sounds.
*You can select whether to continue printing or to stop printing when only1 LED flashes.
(Power) button (B 17)
Press this button to turn the power on or off. To turn the power off, hold the
button for more than 2 seconds.
Feed button (B 16)
Press this button to feed paper.
Meanings
Power is on.
Power is off.
The printer is powering-off.
Error LED
On Printer is offline (paper out, power-on initialization, roll
paper cover open, the remaining battery charge is at S
level).
Off Printer is in normal operation, is running a self-test, or
feeding paper using the Feed button.
Flashing The thermal head is too high in temperature, roll paper
cover was opened during printing, autocutter mulfunction,
abnormality in a memory R/W check, power supply
voltage is extreamely high/low, the CPU has executed an
incorrect address, or abnormality in internal circuit
connection.
Charge LED
On The battery is being charged.
Off The battery is fully charged.
Flashing There is abnormality in battery charging.
Battery Error
LED charge status
LED
3 LEDs On Off Level H
2 LEDs On Off Level M
1 LED On Off Level L
1 LED Off Level S *
flashing
On
3 LEDs Off On Level E
Meanings
Meanings
Battery
-
-
You can continue printing, but
replacement or charge of the
battery is recommended.
Replace or charge the battery.
(Printing may stop in the middle.)
Replace or charge the battery.
(The printer is unable to print.)
Replace or charge the battery.
TM-P60II with Peeler User's Manual 13
English
Meanings