Creating A Pattern Chain For Converting To A Song - Yamaha MOX6 Owner's Manual

9
Press the [F] (Play) button to hear the recorded
Phrase.
If necessary, adjust the octave setting or velocity setting of
the guitar part by using the [F2] NOTE Jobs. For details
about the available parameters, see the "Reference
Manual" PDF document.
NOTICE
If a specific Phrase is assigned to various Sections/Tracks, keep in
mind that editing the Phrase will change the playback sound of all
Sections/Tracks that use this Phrase.
10
Press [STORE]  [F1] SEQ  [ENTER] to store the
recorded Phrases as a Pattern.
This operation will store all the Song/Patterns.
After recording Section B, create other Sections as desired.
As in the Song mode, you can also use Step Recording to
create Patterns.
Creating a Pattern Chain for
converting to a Song
In these instructions you'll learn how to assign each of the
created Pattern Phrases to the Section, arrange the Sections
in your favorite order to create the Pattern Chain, and
convert the Pattern Chain to a Song. This converted Song
data can be used as backing accompaniment for melody
recording.
Pattern Chain
Change the Sections as desired to create the Song you have in mind...
Section A Section B
Creating a Pattern Chain
This section explains how to create a Pattern Chain by
arranging the Sections in order as shown in the example
above.
1
In the PLAY display of the Pattern Play mode,
select the Pattern created in the previous section.
2
Press the [F6] CHAIN button.
3
Press the [REC] button to enter the Pattern Chain
Record mode then set the Recording Track and
Pattern tempo.
Three Pattern Chain Track types are available. The Tempo
Track lets you record tempo changes for the Chain, and the
Scene Track lets you record Track on/off changes. The Pattern
.......
Section F Section H
Song
("patt") Track lets you record Section changes at the desired
measure points in the Song. Here, set "RecTrack" to "patt."
4
Press the [F] (Play) button to start recording then
play the Pattern.
Change the Sections as desired. You can "play" the Section
buttons as the Pattern plays back to create a new Song.
Section A – H
Section I – P
5
Press the [J] (Stop) button to stop recording.
The instrument returns to the CHAIN display of Pattern Play.
6
Press the [F] (Play) button to play the recorded
Pattern Chain.
7
Press [STORE]  [F1] SEQ  [ENTER] to store the
recorded Pattern Chain.
This operation will store all the Song/Patterns.
8
After pressing the [EXIT] button, record the Tempo
Track then Scene Track by repeating steps 3 – 7
above.
When you record the Tempo Track:
In step 3, set the RecTrack to "tempo." In step 4, move the
cursor to the tempo column (
desired by using the [DATA] dial or [INC]/[DEC] buttons.
Tempo change timing will be recorded in real time to the
Tempo Track.
When you record the Scene Track:
In Step 3, set the RecTrack to "scene." In step 4, press the
[MUTE] button so that its lamp lights then turn on/off the
desired Number buttons. The change timing of the on/off
status will be recorded in real time to the Scene Track.
Quick Guide
) then change the tempo as
MOX6/MOX8 Owner's Manual
47