Velocity Change; Measure Copy; Measure Clear; Remove Control Event - Yamaha PortaTone PSR-8000 Owner's Manual

VELOCITY CHANGE

Boosts or cuts the velocity of all notes in the specified part by
the specified percentage.
Use the BOOST/CUT LCD dials to specify the percentage
by which you want the note velocities to be boosted or cut.

MEASURE COPY

.....................................................................
This function allows data to be copied from one measure or
group of measures to another location within the same part.
Use the TOP and LAST LCD dials to specify the first and last
measures in the region to be copied. Use the DEST LCD dial to
specify the top of the measure to which the data is to be copied.
• If the copy destination falls outside the number of measures actually in
the part, the corresponding source measures will not be copied.

MEASURE CLEAR

This function clears all data from the specified range of
measures within the specified part.
Use the TOP and LAST LCD dials to specify the first and last
measures in the range to be cleared.

REMOVE CONTROL EVENT

This function can be used to remove all occurrences of a
specified type of control event from a specified part.
Use the EVENT LCD dials to select the type of event to be
removed.
.............................................................
..................................................................
........................................
The Custom Style Creator
69