Yamaha PortaTone PSR-8000 Owner's Manual page 137

OFF No MIDI data is received.
XG/GM This is the "Multi-Timbre" mode in which the corresponding channel of the internal XG/GM tone
generator is directly controlled by the received MIDI data.
LEAD The LEAD part is controlled by the MIDI data received on the corresponding channel.
RIGHT 1 The RIGHT 1 part is controlled by the MIDI data received on the corresponding channel.
RIGHT 2 The RIGHT 2 part is controlled by the MIDI data received on the corresponding channel.
LEFT The LEFT part is controlled by the MIDI data received on the corresponding channel.
KEYBOARD MIDI note data received by the PSR-8000 plays the corresponding notes in the same way as if
they were played on the keyboard.
CHORD The received notes are used for chord detection for all accompaniment parts other than BASS.
ROOT The received note is used as the root note for the accompaniment BASS part only.
ACMP RHY1~2 The received notes are used as the accompaniment RHYTHM 1 and RHYTHM 2 notes.
ACMP BASS The received notes are used as the accompaniment BASS notes.
ACMP CHD1~2 The received notes are used as the accompaniment CHORD 1 and CHORD 2 notes.
ACMP PAD The received notes are used as the accompaniment PAD notes.
ACMP PHR1~2 The received notes are used as the accompaniment PHRASE 1 and PHRASE 2 notes.
PANEL CONTROL When this mode is selected the received MIDI data controls the PSR-8000 panel operations
rather than playing the internal tone generator. Which panel operations are controlled by which
types of MIDI data are specified in the PANEL CONTROL display page, described below.
VOCAL HARMONY Received notes are used as the added VOCAL HARMONY Vocoder type notes. The volume,
pan, detune, modulation, and pitch bend of the VOCAL HARMONY notes (for any type) can be
adjusted via control change or pitch bend data.
NOTE, CONTROL CHANGE, PROGRAM CHANGE, PITCH BEND, & AFTER TOUCH SWITCH
These "switches" turn reception of the specified data type on
or off. Use the NOTE, CNTCNG, PRGCNG, PITCHBND, and
AFTERTCH LCD dials to turn reception of the corresponding
data on or off. A check mark appears in the appropriate box
when the corresponding switch is turned on.
NOTE This switch turns reception of the note data on or off. When off, no notes will be produced by the
PSR-8000 even when note data is received on the selected channel.
CNTCNG Turns reception of control change data on or off. Control change data includes modulation wheel,
(Control Change) foot controller, and any other controller data (except the pitch bend wheel, which has its own
switch, below).
PRGCNG Turns reception of program change data on or off. Program change data corresponds to voice or
(Program Change) "patch" numbers, and will select the corresponding voices on the PSR-8000 when the PRGCNG
parameter is on.
PITCHBND Turns reception of pitch bend wheel data on or off.
(Pitch Bend)
AFTERTCH Turns reception of keyboard aftertouch data on or off.
(After-touch)
The PSR-8000 "Functions"
• When the receive mode is set to KEYBOARD, re-
ceived program change data switches the REGIS-
TRATION MEMORY setup.
• "-" is displayed for receive modes for which the switches
cannot be turned ON.
137