Edit; Filter - Yamaha PortaTone PSR-8000 Owner's Manual

Custom Voice Creator
The EASY EDIT Mode has the following display pages:

EDIT....................................................................................................... 52

STORE/CLEAR ...................................................................................... 53
Use the and
Use the and
The COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited
voice.
EDIT

FILTER

.....................................................................................................................................................................................................
The timbre of the voice can be varied via the FREQ. and
RESONANCE LCD dials. "0" is the preset value for both
parameters. "+" FREQ. settings produce a brighter sound,
while "+" RESONANCE settings produce a more "peaky"
sound.
EG
............................................................................................................
The EG (Envelope Generator) parameters affect the volume
envelope of the voice.
The ATTACK LCD dial sets the time it takes for maximum
level to be reached after a key is pressed. "0" is the preset value.
"+" settings produce a faster attack.
The DECAY LCD dial sets the time it takes to reach the
sustain level after the maximum attack level has been reached.
"0" is the preset value. "+" settings produce a faster decay.
The RELEASE LCD dial sets the time it takes for the sound
to diminish to zero after a key is released. "0" is the preset value.
"+" settings produce a faster release.
• These parameters may have different effects on different voices.
52
The Easy Edit Parameters
LCD buttons to the right of the display to select the EDIT and STORE/CLEAR display pages.
buttons to the left of the display to select the various parameters within each page.
KEY ON KEY OFF
TIME