One Touch Setting - Yamaha PortaTone PSR-8000 Owner's Manual

Using the Accompaniment Section
cally assigns notes played simultaneously on the right-hand
section of the keyboard to separate parts (voices). The number
of parts which can be assigned depends on the number of parts
turned ON via the PART ON/OFF buttons. If three parts are
turned on, then up to three voices can be assigned. if two parts
are turned on, then only two voices can be assigned. For
example, if the R1, R2, and LEAD parts are turned on and you
play a C-major triad on the right-hand section of the keyboard
(C-E-G), then "C" will be played by the R1 voice, "E" by the R2
voice, and "G" by the LEAD voice.

One Touch Setting

The PSR-8000 One Touch Setting function provides 4 preset
"setups" (i.e. sets of panel settings, including voices, effects,
etc.) for each of the 214 preset accompaniment styles. You can
also create your own One Touch Setting setups for up to 8 styles
(4 setups per style). See page 127 for a complete list of the
parameters set by the One Touch Setting function.
To select a One Touch Setting setup for the current style,
simply press one of the panel ONE TOUCH SETTING but-
tons: [1] ... [4]. The corresponding panel settings will be
recalled and the name of the selected setup will appear in the
upper left-hand corner of the display.
To create a custom setup, set the panel controls as required
then press one of the ONE TOUCH SETTING buttons while
holding the [MEMORY] button. Up to four custom setups can
be created for up to 8 styles. If the number of customizable
setups is exceeded, a message will appear asking if you want to
go to the F4: ONE TOUCH SETTING function display (page
127) to overwrite a previous custom setup.
The OVERWRITE function is only available when the F4:
ONE TOUCH SETTING function display is entered via the
message mentioned above. To overwrite a previous custom
setup, first use the OTS dial to select the number of the setup you
want to overwrite, then press the OVERWRITE LCD button.
• Press any ONE TOUCH SETTING button while holding the
[DIRECT ACCESS] button to jump directly to the F4: ONE
TOUCH SETTING function page.
• OTS can not be recalled during the song play or song record edit mode.
• If OTS is recalled when TALK is on, parameters which are also affected by the TALK function will only take effect when TALK is turned
off.
• The PARAMETER LOCK function (F8: UITLITY functions) affects the One Touch Setting function (page 132).
• The REGISTRATION FREEZE function also affects the One Touch Setting function (page 47).
• One Touch Setting does not work with groove styles or custom styles.
• A "pencil" edit symbol will appear next to the One Touch Setting name on the display if any panel settings are changed after a One
Touch Setting setup has been recalled.
38
......................................................................................................................................................................
• The TRILL effect applies when two right-hand notes
are played.
ONE TOUCH SETTING
1 2
3 4
ONE TOUCH SETTING
1 2
3 4
MEMORY