Advertisement
Program Change ON/OFF
Normally the instrument will respond to MIDI program change numbers received from a computer, causing the same numbered voice
to be selected on the corresponding channel (the keyboard voice does not change). The instrument will normally also send a MIDI pro-
gram change number whenever one of its voices is selected, causing the same numbered voice or program to be selected on the com-
puter if the computer is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel
program change number reception and transmission so that voices can be selected on the instrument without affecting the computer.
While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press the C#5
key. Pressing the C#5 key repeatedly toggles between Program Change On and Off.
Control Change ON/OFF
Normally the instrument will respond to MIDI control change data received from a computer, causing the voice on the corresponding
channel to be affected by pedal and other "control" settings received from the controlling device (the keyboard voice is not affected).
The instrument also transmits MIDI control change information when the pedal or other appropriate controls are operated. This func-
tion makes it possible to cancel control change data reception and transmission so that, for example, the pedal of the instrument and
other controls can be operated without affecting a computer.
While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press the D5
key. Pressing the D5 key repeatedly toggles between Control Change On and Off.
C3
C0
C1
C2
C3
C0
C1
C2
C#5
C4
C5
C6
C7
C4
C5
C6
C7
D5
MIDI Functions
For information on program change num-
bers for each of the Voices of the instru-
ment, refer to "Preset Voice List" on page
4.
Default setting: ON
For information on control changes that
can be used with the instrument, refer to
"MIDI Implementation Chart" on page 5.
Default setting: ON
P-125a MIDI Reference
Advertisement
