.......................................................................................................................................................................................

Instead of starting with all the sections and/or parts from the

selected original style, you can copy specific parts from other

sections/parts of the same style, or from other styles as required.

Use the

LCD button to the left of the display to select the

PART COPY parameters. Then use the CATEGORY/STYLE

LCD dials to select the style from which you want to copy a part,

the SECTION LCD dials to select the section you want to copy

from, the PART LCD dials to select the part you want to copy

("ALL" to copy all parts of the selected section at once), and the

DESTINATION LCD dials to select the part in the currently

selected section to which you want to copy the selected part

(only "ALL" will be available when the PART parameters is set

to "ALL"). Once the source part(s) and destination have been

specified, press the EXECUTE LCD button to actually copy the

part(s).

SETUP

VOICE

.......................................................................................................................................................................................................

These parameters assign voices to the parts available in the

currently selected section.

Use the PART LCD dials to select a part you want to assign

a different voice to. "*" will appear for parts which contain no

data and cannot be selected.

Use the CATEGORY LCD dials to select a voice category,

and the VOICE dials to select the specific voice to be assigned

to the selected PART. Voices which cannot be used will not be

displayed.

Editing Other SETUP Parameters

Other SETUP parameters (volume, effects, etc.) can be edited

via the FULL MIXING CONSOLE [ACMP PART] displays