E2:EG
• The RESET LCD button resets the currently selected EG parameters to their most basic settings.
AMP RATE
(Amplitude Envelope Rate)
These parameters set the rate of output level variation. Higher
values produce faster variation.
ATTACK
Sets the rate of variation from key-on to the
maximum attack level.
DECAY1
Set the rate of variation between the maximum
attack level and the levels set by the AMP LEVEL
DECAY2,
DECAY1 and DECAY2 parameters and the final
DECAY3
level, respectively.
RELEASE
Sets the rate of variation from the level at key-
release to level 0 when SUSTAIN is off.
SUSTAIN
Sets the rate of variation from the level at key-
release to level 0 when SUSTAIN is on.
AMP LEVEL
(Amplitude Envelope Level)
These parameters set the amplitude envelope output level.
INITIAL
Sets the initial level of the envelope.
DECAY1,
Set the levels after DECAY1 and DECAY2
DECAY2
variation.
ATTACK
DECAY1 RATE
RATE
INITIAL
LEVEL
KEY ON
................................................................................................................................
...........................................................................................................................
DECAY2 RATE
DECAY3 RATE
Custom Voice Creator
RELEASE RATE
SUSTAIN RATE
KEY OFF
* Higher rate values produce faster variation.
TIME
57