Full - Yamaha PortaTone PSR-8000 Owner's Manual

Song Playback
mode or a GM/XG song is being played, individual parameters
for all 16 tracks will be available: TR1 through TR16 (track
groups TR1—TR8 and TR9—TR16 will be selected in se-
quence when the [FADER] button is pressed). If a Yamaha DOC
song is being played use the RHY, BASS, ORCH., LEFT, and
RIGHT part LCD dials to set the volume of the corresponding
tracks. If a PianoSoft type song file is being played use the
ORCH, LEFT, and RIGHT part LCD dials to set the volume of
the corresponding tracks.
When the SWITCH display is selected the FADER button
alternately selects the standard PART SWITCH controls found
in the normal PLAY mode (page 22), and independent SOLO/
PLAY/MUTE switches for each of the available tracks. Muted
tracks or groups of tracks do not play. If a track or group of
tracks is set to SOLO only that track or group will play.
The track indicators above the track volume or mute/solo
parameters indicate which parts correspond to which tracks,
and which tracks contain data and which are muted, as shown
below.
No data
• When a GM/XG song or a song with the "/" symbol in the SONG
SELECT display is played, all tracks appear on the display as if they
contain data, even if they don't.

FULL

......................................................................................................
When the FULL MIXING CONSOLE VOLUME/PAN/
EQ, FILTER, or EFFECT DEPTH display is selected, the
[FULL] button will select the normal parts display, song track
TR1—TR8, and song tracks TR9—TR16 in sequence. When
a song track display is selected "---" will appear in place of a
value for parameters which are not available.
104
Play track Muted track