Delay (Delay Vibrato); Voice Set; Reverb, Chorus, And Dsp Depth; Dsp Type And Variation - Yamaha PortaTone PSR-8000 Owner's Manual

Custom Voice Creator
DELAY
(Delay Vibrato)
Delay Vibrato is a vibrato effect based on LFO modulation which has a variable delay between the time a key is played
and the beginning of the vibrato effect.
TIME Sets the delay between key-on and the beginning of LFO PMOD (pitch) modulation. No delay is produced
when TIME is set to its minimum value. In this case, only normal vibrato is produced regardless of the
RATE value.
RATE Sets the rate at which LFO PMOD (pitch) modulation is applied after the delay time — i.e. how long it
takes to reach maximum modulation level after modulation begins.

VOICE SET

VOICE SET data are automatically recalled and displayed in the appropriate FULL MIXING CONSOLE displays
(page 39) whenever a voice is selected when the VOICE SET DSP and EQ parameters in the F4: REGISTRATION/
ONE TOUCH SETTING/VOICE SET display page is ON.

REVERB, CHORUS, and DSP DEPTH

The DEPTH parameters set the depth of the corresponding
effect. The ON/OFF parameters turn the corresponding effect
on or off.

DSP TYPE and VARIATION

The DSP TYPE parameter selects the type of DSP effect,
while the VARIATION ON/OFF parameter turns effect VARIA-
TION on or off. The VARIATION PARAMETER and VALUE
parameters determine the variation parameter value when the
effect VARIATION is turned ON.

EQ LOW and HIGH

These parameters apply low (bass) and high (treble) EQ to
the voice. The FREQUENCY parameters set the rolloff fre-
quency of the LOW or HIGH bands.
60
.....................................................................................................................................................................
................
............................................
.................................................................