Select style to delete.
This message appears when DELETE is selected from the display shown above.
Select the style to be deleted and press the OK button. Press CANCEL if you do not want to delete the style.
Can't delete this style!
This message appears if the style selected for deletion in the display shown above is the source style on which the style currently being edited
was based.
Press OK to return to the preceding display, and select a different style for deletion.
Style File Load
Not enough memory! Delete an unneeded style?
This message appears when you attempt to load a Style file without there being enough memory to hold the specified file.
Too much data for LISTEN function! Load data.
Some Style Files are too large to be handled by the LISTEN feature in the Style File Load function.
Step Edit
Can't perform this operation on SYSTEM track!
This message appears if you try to record note data or perform a cut, copy, or paste operation on the SYSTEM track while editing a song with
the Step Edit function.
Select a different track (1 through 16) and try the operation again.
Invalid data!
This message appears if you try to record an event that either contains invalid data (e.g., a System Exclusive event that is not terminated by an
F7) or is located at an inappropriate timing (e.g., a Time Signature event in the middle of a measure).
Check the parameter settings in the event against the MIDI Data Format, then record the event again.
Chord Sequence
Save recorded data?
This confirmation message appears if you attempt to exit the Chord Sequence function during recording.
Press YES to store the recorded data. Press NO to exit without storing. Press CANCEL to return to the Chord Sequence display
without storing.
Button not valid! Enter at top of measure.
This message appears when you attempt to enter an accompaniment style or section change at a position other than the beginning of a measure
while recording data with the Chord Sequence or Accompaniment Assistance functions.
Record the style or section change in question at the beginning of the measure.
CVP-105
31