About Your Turbodx Ev Charging Station - Webasto TurboDX User Manual

ABOUT YOUR TURBODX EV CHARGING STATION

Thank you for purchasing the TurboDX EV Charging Station for your electric
vehicle's on-board charger. TurboDX supplies and manages AC power to your
electric vehicle and is compatible with a variety of battery electric and plug-in
hybrid electric vehicles. To avoid unauthorized use, it is recommended that you
mount a usage switch in a secured or controlled location.
In case of malfunction, please refer to the "Troubleshooting" guide in Section
3 of this document. If the guide cannot sufficiently help to solve the issue,
please contact Customer Service to find an authorized electrician for further
investigation.
The TurboDX EV Charging Station operates from 208 to 240 VAC 50/60 Hertz.
KEY FEATURES
• Compact design
• Overheating protection
• Network flexibility (select models)
• Quick-read status indicators
• Underwriters Laboratories (UL) listed
• SAE J1772 compliant
• Auto-restart in event of ground fault or power outage
Operation: The TurboDX EV Charging Station requires either a 240 VAC split
phase or a 208 VAC three phase (two legs) or 230 VAC phase-ground circuit. It
draws a maximum of 16 amps (IEC or GB/T) continuous current and requires a 20
amp rated circuit breaker, or 32 amps (SAE) continuous current and requires a 40
amp rated circuit breaker.
WARNING
WARNING
The TurboDX EV Charger must be installed by a licensed, qualified
electrician. To avoid serious injury or death, installation must comply with
the provisions of local codes.
This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. The unit detects the presence of a good ground
(GND) connection and will not operate if GND is disconnected.
3