Table of Contents
Advertisement
WARNING
WARNING
DANGER
WARNING
WARNING
NOTE
4
Improper connection of the electrical grounding conductor might result in
a risk of electric shock. FOR PLUG-IN MODELS ONLY: Do not modify the
plug provided with the product if it does not fit in the outlet. Have a proper
outlet installed by a qualified electrician.
Do NOT DROP coupler.
................................................................................................................
If the output cable becomes separated from the TurboDX EV Charging
Station module or the charge coupler, DO NOT ATTEMPT TO REPAIR THE
CABLE YOURSELF. Contact Customer Service for assistance.
................................................................................................................
If there is any physical damage to the unit, discontinue use immediately and
contact Customer Service.
................................................................................................................
When using your TurboDX EV Charging Station, basic precautions should
always be followed, including the following:
•
Read the warning label on TurboDX unit before operating the unit the
first time. Read all instructions in this guide before using this product.
•
Children should be supervised when in the vicinity of the charger while
plugged in.
•
Do not put fingers into the electric charge coupler.
•
To reduce the risk of fire, connect only to a circuit provided with 20
amps (IEC or GB/T) maximum branch circuit overcurrent protection or
40 amps for SAE applications.
•
Do not use in a commercial garage classified for internal combustion
engine vehicles due to vapors of flammable liquids (gasoline) being
present.
..................................................................................................
The TurboDX EV Charging Station detects the presence of a good ground
(GND) connection and will not operate if GND is disconnected.
Hide quick links:
Advertisement
Table of Contents
