Table of Contents
Advertisement
REQUIRED FOR INSTALLATION PREPARATION
WARNING
NOTE
WARNING
TURBODX EV CHARGING STATION - COMPONENTS
SAE Charge Coupler
Any electrical installation should be performed and checked by a licensed,
qualified electrician.
A dedicated 240 VAC split phase circuit or a 208 VAC three phase (two legs)
or 230V phase-ground circuit are required. A 20 amp rated circuit breaker for
IEC or GB/T, or 40A rated circuit breaker for SAE are required.
Avoid contact with exposed electronics during handling of charger.
Charge Cable or Cord
The TurboDX EV Charging Station has an integral
cord hanger. Wrap the cord around the unit to
keep it off the ground.
GB/T Charge Coupler
IEC Charge Coupler
5
Hide quick links:
Advertisement
Table of Contents
