Names And Functions Of Parts - McQuay MQS-24018-CFC216A Installation And Operation Manual

1

Names and Functions of Parts

①
POWER
②
COOL
③
HEAT
④
Remote controller
Instruction of LED Board Display
① Indication LED of "POWER": The LED will go on when the unit is power on
② Indication LED of "COOL" : The LED is on under "COOL " mode operating
③ Indication LED of "HEAT": The LED is on under "HEAT" mode operating
④ Display of temperature or malfunction code.
:
CAUTIONS
Wrong wiring will cause electrical malfunction.
Do not pull the wire when fixing it with wire clamps.
Do not make the wire too loose in the outdoor unit.
NOTES:
If the power cord is damaged, it must be replaced by the manufacturer or its service agent or other
qualified person in order to avoid hazard.
The unit should be installed in accordance with national wiring regulations.
The gap between all terminals on the breaker must be 3mm at least. All wiring terminals must be
installed in its ports. And the wires must be fixed with wire clips.
Air outlet
The LED will go off when the unit is power off
The LED is off when "COOL" mode is not operating
The LED is off when "H EAT" mode is not operating
1
Power cable
Drainage pipe
Refrigerant pipe