McQuay MQS-24018-CFC216A Installation And Operation Manual page 17

5.2 Buttons
5.2.1 Silk Screen of Buttons
5.2.2 Instruction to Function of Buttons
Table 3.2
No. Description
1 Enter/cancel
2
6
3
4
Mode
5 Function
Timer
7
On/off
8
4 Mode
Memory function
and
2
2
and
6
Fig. 5-3 Silk screen of buttons
(1) Function selection and canceling;
(2) Press it for 5s to enquiry the outdoor ambient temperature.
(1) Running temperature setting of indoor unit, range :16～30 C
(2) Timer setting, range:0.5-24hr
(3) Switchover between quiet/auto quiet
Fan Setting of high/middle/low/auto fan speed
Setting of cooling/heating/fan/dry mode of indoor unit
Switchover among these functions of air/sleep/turbo/save/e-heater/blow/quite
Timer setting
Turn on/off indoor unit
Press Mode and
memory function (If memory is set, indoor unit will resumer original
setting state after power failure and then power recovery. If not, indoor
unit is defaulted to be off after power recovery. Memory function is
set to be before outgoing.)
Upon startup of the unit without malfunction or under off state of the unit,
Lock press
buttons won't respond the press. Repress
Function of Button
for 5s under off state of the unit to Enter/cancel key
key at the same time for 5s in to lock state. In this case, any other
13
key for 5s to quit lock state.