McQuay MQS-24018-CFC216A Installation And Operation Manual page 40

Side panel fixing screw (M4.2)
3. Loosen two hanger bracket setting bolts (M8) on earth side for less than 10mm. Remove two hanger
bracket fixing bolts (M6) on the rear side. Detach the hanger bracket by pulling it backward (See Fig.
11-5)
Set the suspension bolts.
Adjust the distance between the unit and the ceiling slab beforehand (see Fig..11-6). Fix the hanger bracket to the
suspension bolt.
WARNINGS
!
1. Make sure that extended suspension bolts from the ceiling stay inside the arrowed position. Readjust the hanger
bracket when it is outside the arrowed position. (See Fig. 11-7)
Hanger bracket fixing bolt
Hanger bracket
Suspension bolt
(Use M10 size suspension bolts)
35m m or less
Suspension bol
H anger bracket
Fig. 11-4
Fig. 11-5
Fig.11-6
36