McQuay MQS-24018-CFC216A Installation And Operation Manual page 25

5.4.9 Turbo Function Setting
TURBO function: The unit at high fun speed can realize quick cooling or heating so that room temperature can
quickly approach setting temperature.
In cooling or heating mode, press Function button till the unit enters TURBO function and then press Enter/cancel
button to turn on TURBO function.
During TURBO function, press Function button till the unit enters TURBO function and then press Enter/cancel
button to cancel TURBO function.
TURBO function setting is shown in Fig.5-13
Fig.5-13 Turbo Function Setting
Note:
1. TURBO function will be turned off after power failure and then recovery. In dry, fan and auto mode, TURBO
function can not be set and TURBO mark won't be displayed.
2. TURBO function will be automatically canceled after setting of quiet function.
5.4.10 SAVE Function Setting
Energy Saving Function: Energy saving can make the air conditioner runs in a smaller temperature range by setting
lower limited value of setting temperature in cooling or dry mode and upper limited value in heating mode.
Energy Saving Setting for Cooling
Under on-state and in cooling or dry mode of the unit, press Function button into energy saving function , with
SAVE blinking .Press or button to adjust lower limited value of setting temperature in cooing mode. After that
press Enter/Cancel button to turn on energy saving function for cooling.
Energy Saving Setting for Heating
Under on state and in heating mode of the unit, press Function button into energy saving function, with SAVE
blinking. Press Mode button into energy saving function for heating and then press or button to adjust upper
limited value of setting temperature in heating mode. After that, press Enter/Cancel button to turn on energy saving
function for heating.
21