Removal Of Communication Cable - Newland NLS-HR100 Quick Start Manual

Getting to Start

Removal of Communication Cable

A Pin that fit the HR100 "Dismount hole" is needed. A paper clip could be ideal. Stretch one
end of the paper clip to fit the "Dismount Hole". Follow the steps:
1Ã For RS232 and PS/2 connections, unplug the power adaptor.
2Ã Insert the Pin into "Dismount Hole" and keep some pressure.
3Ã Pull out the cable gently.
4Ã Pull out the Pin after the cable is removed.
5Ã Unplug the connector from the Host.
E-07