Quantum StorNext QM1200 Manual page 7

StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive
Figure 6 Drive StatusLED
ATTENTION Potential damage to drives
mechanism or connectors. To avoid damage when removing or installing a drive, always place your hand
under the drive to support its weight.
6. If a fault is detected, the amber Drive Service Action Required LED is on
Before you can safely remove the drive, the blue Drive Service Action Allowed LED must be on
7. Remove the failed drive from the base system.
a. Pull the drive handle to the left for a drive in the QM1200 or QS1200 base system
Figure 7 Removing and Replacing a Drive in the StorNext QM1200 or QS1200 Base System
1. Drive Service Action Allowed LED (Blue)
2. Drive Service Action Required LED (Amber)
3. Drive Power LED (Green)
1. Drive Handle
–
Bumping drives against another surface can damage the drive
Quantum Corporation
- 5 -
6, Item2). 
(Figure
(Figure
(Figure 7).
April 2015
6, Item1).