Quantum StorNext QM1200 Manual
Replacing a drive of base system
Hide thumbs
Also See for StorNext QM1200:
- Replacing manual (12 pages) ,
- Replacing manual (6 pages) ,
- Replacing manual (11 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Quantum StorNext QM1200
Summary of Contents for Quantum StorNext QM1200
- Page 1 StorNext QM1200, QS1200 or QS2400 Base System Replacing a Drive *6-67542-02 B* 6-67542-02 Rev B...
- Page 2 StorNext QM1200, QS1200 or QS2400 Base System, Replacing a Drive, 6-67542-02 Rev B, April 2015, Product of USA. Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice.
- Page 3 StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive April 2015 Replacing a Drive in the StorNext QM1200, QS1200 or QS2400 Base System In this procedure, you will replace a failed drive with a new drive. Before you start to replace a drive in the base system, gather antistatic protection and a replacement drive.
-
Page 4: Drive Status Leds
StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive April 2015 QS2400 Drive Tray Figure 2 provides an illustration of the QS2400 service action required LED. Figure 2 QS2400 service action required LED Service Action Required LED (Amber) - Page 5 StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive April 2015 Removing a Drive from the Drive Tray – You must replace the drive within three minutes after ATTENTION Possible equipment damage removal to prevent the possibility of overheating the equipment.
- Page 6 StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive April 2015 Check the Controller-Drive Tray Service Action Required LED to locate the failed drive (Figure 4 Figure You can also check the Drive Service Action Required LED on the drive...
- Page 7 Remove the failed drive from the base system. Pull the drive handle to the left for a drive in the QM1200 or QS1200 base system (Figure Figure 7 Removing and Replacing a Drive in the StorNext QM1200 or QS1200 Base System Drive Handle Quantum Corporation...
- Page 8 StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive April 2015 Pull the drive handle up for a drive in the QS2400 base system (Figure Figure 8 Removing and Replacing a Drive in the StorNext QS2400 Base System Drive Handle Use the drive handle to pull the drive out a few centimeters, and allow the drive to spin down.
- Page 9 StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Drive April 2015 The Drive Power LED is on, or the Drive Service Action Required LED is off – Go to step 4. — The Drive Service Action Required LED is on – The new drive might be defective. Replace it with another —...