Pto Selection Control Lever; Pto Speed Control Lever 540 Or 1000 Rpm; Pto Speed Control Lever 540 Or 540 E Rpm - Zetor Proxima Series Operator's Manual

PTO SELECTION CONTROL LEVER

a - Independent speed of PTO shaft
- PTO shaft speed depends upon
the engine speed
n - Neutral
b - Ground speed of PTO shaft
(through gearbox) - PTO shaft
speed depends upon the en-
gaged gear speed
Shifting is made when the tractor stops.
Standard tractor models are equipped
with six-spline PTO shaft end.
ACQUAINTANCE WITH TRACTOR
G154
 PTO SPEED CONTROL LEVER 540
OR 1000 RPM
a - 540 rpm
n - Neutral
b - 1000 rpm
Shifting is made when the tractor stops.
 Tractor can be equipped with the fol-
lowing changeable PTO shaft ends as
option:
six-spline PTO shaft end - 540 rpm
twenty-one-spline PTO shaft end - 1000
rpm.
PTO speed shifting of either 540
or 1000 rpm is possible regard-
less to assembled PTO shaft end (with
six or twenty-one splines). PTO speed
and the shaft end type must be chosen
depending upon prescribed speed of im-
plemented machine.
45
G153
 PTO SPEED CONTROL LEVER 540
OR 540 E RPM
a - 540 rpm
n - Neutral
b - 540 E rpm
Gear 540 E serves for reaching of
540 rpm of the PTO shaft with preserva-
tion of economical engine speed.
Shifting is made when the tractor stops.
PTO speed shifting of either 540
or 540 E rpm is possible regard-
less to assembled PTO shaft end (with
six or twenty-one splines). PTO speed
and the shaft end type must be chosen
depending upon prescribed speed of im-
plemented machine.
G153