Table of Contents
Advertisement
Instruction Manual Dräger P7-TDX
5. Selecting and entering customer data
Using the PC software, there is the option of creating a cus-
tomer number, customer name and customer data and
transmitting this information to the measuring device.
If customer data is stored in the device, this function can be
used to select a customer and store data measurements un-
der this customer's name.
If there is no customer data stored for the customer, it can be
entered using this function.
The context menu is opened with (
).
lll
No customer is selected using
.
(Without)
New customer data can be created using
.
(New)
The
highlighted
customer
number
and,
if
available,
corresponding data are shown using (
).
Edit
This data can be edited using
and accepted using
(SELECT)
.
(END)
The following can be stored: Customer number, name, system type, installation location,
system number, street, post code, city, customer name, customer's street, customer's post
code, customer's city, customer's phone number.
A customer name can be searched for in the data stored using
.
(Search)
The customer number shown can be accepted using (
).
SELECT
The accepted customer number applies to all subsequent measurements until the device
is switched off or another number is selected.
The entire customer dataset can be deleted using
. Individual customer datasets
(Delete)
can only be deleted if this function is activated and there are no measurements stored on
the device.
9
Advertisement
Table of Contents
