Table of Contents
Advertisement
17.3 Selection of the damping value for the pressure sensor
The damping value for the pressure sensor can be changed
for a normal pressure measurement.
The following damping values can be selected:
OFF
= no damping
MEDIUM
= medium damping
HIGH
= high damping
17.4 Adjust backlight
The following backlight intensity levels can be selected:
25 %, 50 %, 75 % and 100 %.
The selected intensity of the backlight is retained even after
switching off the measuring device.
17.5 Switch key tone on / off
This function allows switching the key tone on and off.
17.6 Automatic switch off (standby)
Selection of the time before the device goes into standby
mode.
OFF
= standby mode off
SHORT
= reduction of the backlight after 30 s,
switch off after 30 min
MIDDLE
= reduction of the backlight after 60 s,
switch off after 60 min
LONG
= reduction of the backlight after 10 min, switch off after 180 min
Instruction Manual Dräger P7-TDX
40
Advertisement
Table of Contents
