Ec-Declaration Of Incorporation - Deprag MINIMAT-EC 320E22-00120 Operating Instruction Booklet

13 EC-Declaration of Incorporation

EC-Declaration of Incorporation in accordance with the EC Machinery Directive 2006/42/EC,
Annex IIB
As manufacturer of the partly completed machine we declare that:

the essential requirements of the Directive 2006/42/EC and where applicable the other Direc-
tives and Standards listed below apply to the specified machine.

the relevant technical documentation is compiled in accordance with part B of Annex VII.

the relevant technical documentation in accordance with part B of Annex VII will be transmitted
in response to a reasonable request by the national authorities in printed form or in electronic
form (pdf).
Manufacturer
Authorized Person
for Documentation
Name
Machine Type
Serial Number
Year of Manufacture
Directives
2006/42/EG
2006/95/EG
2004/109/EG
Standards
DIN EN ISO 12100
IEC 801
EN 50082-1
EN 61000-4-11
DIN VDE 0846, 0843, 0871
EN 55011 Kl. A
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the Directive 2006/42/EC, where
appropriate.
02/06/2014
DEPRAG SCHULZ GMBH u. CO.
P.O. Box 1352, Germany-92203 Amberg
Carl-Schulz-Platz 1, Germany-92224 Amberg
Mr. Josef Bock, address see manufacturer
EC-SCREWDRIVER

_________________________________________________________
_________________________________________________________
_________________________________________________________

Date
2006-06
2006-12
2004-12
Date
2011-03
2007-10
1999-09
2005-02
1994-08; 2008-06
2011-04
22

