Safety Instructions - Deprag MINIMAT-EC 320E22-00120 Operating Instruction Booklet

2

Safety Instructions

see also enclosed safety instruction booklet no. 016000
WARNING
Potential loss of life due to electric shock!
Work on electrical equipment may only be carried out by qualified electrical
technicians.
WARNING
Serious injuries or even death possible!
Disconnect screwdriver from power supply before changing or mounting the
screwdriver tool (bit, socket) or accessory.
CAUTION
Screwdriver will heat-up in relation to its average load respectively
sequence of operation
If the selection of the type of screwdriver is incorrectly or its operation is not
appropriate for the application, the tool might overheat which could result in
injuries (burnings).
Use the screwdriver only as described in the operating instruction booklet.
CAUTION
Risk of crushing hands between holding bracket and work piece or
modification parts in confined spaces.
Make sure that any bracket used is correctly installed.
Keep hands away from holding fixture (if used). This applies especially
when unscrewing.
CAUTION
Rotating drive, rotating bit/socket or drive extension.
Injuries to fingers or even broken fingers.
When wearing gloves (e.g. rubber coated or metal reinforced) make sure
that they not become entangled.
Do not wear loose fitting gloves or gloves with cut or frayed fingers.
4