Required Equipment - Deprag MINIMAT-EC 320E22-00120 Operating Instruction Booklet

6.3.1 Required Equipment

Name
Sequence controller AST10-1
Sequence controller AST10-1-P (prepared for Profibus)
OR
Sequence controller AST10-1-P kpl. (with integrated
Profibusmodule)
Motor cable KMO-AST1x (length 8.2 / 16.4 / 26.2 / 39.4 ft.)
 to connect EC-screwdriver spindle with sequence controller
alternativ: Motor cable with angle connection 90° KMO-AST1x
(length 8.2 / 16.4 / 26.2 / 39.4 ft.)
 to connect EC-screwdriver spindle with sequence controller
Power supply cable KN-AST10/11/40 (length 5.9 ft. EU / 5.9 ft.
US, 8.2 ft. CHINA)
 to connect sequence controller to power supply
Name
Sequence controller AST11-1
OR with module „safety stop"
Sequence controller AST11-1-S
Motor cable KMO-AST1x (length 8.2 / 16.4 / 26.2 / 39.4 ft.)
 to connect EC-screwdriver spindle with sequence controller
alternativ: Motor cable with angle connection 90° KMO-AST1x
(length 8.2 / 16.4 / 26.2 / 39.4 ft.)
 to connect EC-screwdriver spindle with sequence controller
Power supply cable KN-AST10/11/40 (length 5.9 ft. EU / 5.9 ft.
US, 8.2 ft. CHINA)
 to connect sequence controller to power supply
Connector cable AST10-Screwfeeder
Name
Sequence controller AST6-1
Sequence controller ASTi6-1
Power supply cable 230V-1.8 m / 5.9 ft
Power supply cable 115V-1.8 m / 5.9 ft
(without display)
11
Order No.
385440 A
385440 B
385440 P
385442 A / B / C / D
385442 E / F / G / H
385443 A / B / C
Order No.
390041 A
390041 B
385442 A / B / C / D
385442 E / F / G / H
385443 A / B / C
385477 A
Order No.
428001 A
428004 A
812587
812295