Specifications Of Individual Units - Omron NX Series Manual

Specifications of Individual Units

Communication Control Unit
Unit name
Model
Indicators
Hardware switch settings
Dimensions *1
Weight *2
Number of NX Units that you can connect
Power supply voltage
Unit power consumption
Unit power supply Inrush current
Current capacity of power supply terminal
Isolation method
NX Unit power supply capacity
Power supply to the
NX Unit power NX Unit power supply efficiency
supply
Isolation method
Power supply voltage
I/O power supply to
NX Units
Maximum I/O power supply current
External connection terminals
Terminal connection diagram
Accessories
Installation orientation and restrictions
*1. Includes the End Cover, and does not include projecting parts.
*2. Includes the End Cover. The weight of the End Cover is 82 g.
Communication Control Unit
NX-CSG320
[RUN] indicator, [ERROR] indicator, [BUSY] indicator, [SD PWR] indicator, [SD BUSY]
indicator, [NS] indicator × 2, [L/A] indicator, [L/A 2A] indicator, [L/A 2B] indicator, [TS]
indicator, [UNIT PWR] indicator, [I/O PWR] indicator
[RUN] indicator,
[ERROR] indicator,
[BUSY] indicator
[SD PWR] indicator,
[SD BUSY] indicator
[NS] indicator,
[L/A] indicator
[NS] indicator,
[L/A 2A] indicator,
[L/A 2B] indicator
[IP ADDRESS 1] Switch (x16, x1), [IP ADDRESS 2] Switch (x16, x1), DIP Switch
* Factory default
• IP ADDRESS1: 192.168.1.1
• IP ADDRESS2: 192.168.250.1
72 × 100 × 90 mm (W × H × D)
390 g
32 units or less
24 VDC (20.4 to 28.8 VDC)
5.95 W
For cold start at room temperature:
10 A max./0.1 ms max.
and
2.5 A max./150 ms max.
4 A
No isolation: Between the Unit power supply terminal and internal circuit
10 W max.
80%
No isolation: Between the Unit power supply terminal and NX Unit power supply
5 to 24 VDC (4.5 to 28.8 VDC)
4 A
Screwless clamping terminal block (8 terminals)
UV/UG: Unit power supply terminals
IOV/IOG: I/O power supply terminals
A1
NX Unit power supply
(24 VDC)
I/O power supply
(5 to 24 VDC)
A8
Ground of 100 Ω
or less
End cover (NX-END02): 1 pc.
Only upright installation orientation
NX-CSG/SL5/SI/SO
[TS] indicator,
[UNIT PWR] indicator,
[I/O PWR] indicator
[IP ADDRESS 1] Switch = "00"
[IP ADDRESS 2] Switch = "00"
B1
Through-wiring for
UV UV
unwired terminals
UG UG
IOV IOG
B8
6