Pro-Duty Pump Removal - Graco Airlessco PRO-DUTY Series Repair Manual

Pump Removal
PRO-DUTY Pump
Removal
1. Stop pump with piston rod in the lowest
position.
2. Perform Pressure Relief Procedure,
page 5.
3. If necessary remove guard or pail hook
to gain access to the pump.
4. Disconnect outlet hose and suction
hose from pump.
ti29859a
8
5. Use a screwdriver to push retaining
spring up then push pin out.
6. Loosen pump jam nut by hitting firmly
with a hammer. Unscrew pump.
ti29860a
3A4347D