Installation; Transport - GE TLE Scalable Series Installation Manual

4

INSTALLATION

4.1

TRANSPORT

The UPS is packaged on a pallet suitable for handling with a forklift.
The UPS must be moved in upright position.
Do not tilt cabinets more than +/- 10° during handling.
Move the UPS in its original package to the final destination site.
Do not stack other packages on top: This could damage the UPS.
Forklift
Fig. 4.1-1 Position of the forklift when moving the unpacked UPS
Crane
Fig. 4.1-2 Position of the carrying belts when moving the unpacked UPS
WARNING !
When loading / unloading and when
moving the UPS, it is forbidden:
When loading / unloading and when
moving the UPS, pay attention to:
Modifications reserved
GE_UPS_ISG_TLE_SUL_40K_M15_1US_V010.docx
Critical Power
Forklift
The UPS may be lifted with a forklift in
upright position.
Take note of the center of gravity
marked on the package.
WARNING !
Check
elevator loading capacity.
Transport UPS only in upright
position.
Do not stack other package on top
of the UPS.
Crane
If the UPS has to be lifted by crane, use
suitable carrying belts taking note of the
center of gravity marked on the
package.
Take all necessary precautions to
avoid damage to the cabinet while
hoisting the UPS.
for sufficient floor
Installation Guide TLE Scalable Series 40 - 150 UL S1
and
Page 12/53