3-Ph Snmp/Web Plug-In Adapter" Board - GE TLE Scalable Series Installation Manual

5.3

"3-PH SNMP/WEB PLUG-IN ADAPTER" BOARD

Fig. 5.3-1 "3-ph SNMP/WEB plug-in adapter" board
For additional information about "3-ph SNMP/WEB plug-in adapter" card
configuration and functionalities, please refer to "3-ph SNMP/WEB plug-in
adapter" manual included into CD-Rom.
Modifications reserved
GE_UPS_ISG_TLE_SUL_40K_M15_1US_V010.docx
Critical Power
3-ph SNMP/WEB plug-in adapter
SNMP - Simple Network Management Protocol
The "3-ph SNMP/WEB plug-in adapter" is an
interface to the Ethernet Network, and provides
UPS information via the standard SNMP Protocol
(UPS-MIB (RFC-1628); GE Single MIB; GE Parallel
MIB).
The UPS can therefore be monitored by a Network
Management System (NMS) or by our applications
(for instance GE iUPSGuard or GE Data Protection),
which uses this information to determine the state
of the UPS in order to guarantee safe and orderly
shut-down of the server, when needed.
Installation Guide TLE Scalable Series 40 - 150 UL S1
Page 50/53