Installing The Floppy Disk Drive (Optional) (Cvp-509/505)118 - Yamaha CLAVINOVA CVP-501 Owner's Manual

Installing the Floppy Disk Drive
(Optional) (CVP-509/505)
The floppy disk drive can be installed to the bottom of the instrument by using the included floppy disk drive case
and screws.
For a list of optional floppy disk drives available for this instrument, see "Optional Accessories" (page 127).
Have a Phillips-head (+) screwdriver of the appropriate size ready.
1
Remove the three backing papers from the
adhesive tape in the case, and fit the floppy
disk drive into the case.
Insert the drive to the case, with the side having the rubber
stoppers facing the case.
Dual-sided adhesive tape
2
Fold the USB cable inside the case as shown.
118
CVP-509/505/503/501 Owner's Manual
3
3
Attach the drive and case assembly to the left
underside of the instrument, using the
included four screws (4mm x 10mm).
4
Connect the USB cable to the [USB TO
DEVICE] terminal.