Changing Voices and Adjusting Panning/Volume for Each Part
You can change the Voice and adjust panning and volume for each keyboard part,
Style channel or Song channel.
Changing the Voice for each part
Same operation as in the "Basic Procedure" on page 88. In step
2, select VOL/VOICE tab.
Press the [C] (or [H]) button to select the VOICE parameter.
Press one of the [1 ▲▼] – [8 ▲▼] buttons to select the desired
The Voice Selection display appears.
Select a Voice.
Press one of the Voice category selection buttons on the panel, then select a
Voice by using the [A] – [J] buttons (page 37).
Press the [EXIT] button to return to the MIXING CONSOLE
Save your settings (step 5 on page 89).
CVP-509/505/503/501 Owner's Manual
• Some Voices (such as Organ
Flutes) cannot be selected for Style
• The RHY2 channel in the STYLE
PART display can only be assigned
Drum kit Voices and SFX kit
• When playing GM Song data, chan-
nel 10 can only be used for a Drum