Installing the Floppy Disk Drive (Optional)
The optional UD-FD01 floppy disk drive can be installed to the bottom of the instrument by using the included floppy
disk drive case and screws.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
1.
Remove the three backing papers
from the adhesive tape in the case,
and fit the floppy disk drive into
the case.
Insert the drive to the case, with the side
having the rubber stoppers facing the case.
Dual-sided adhesive tape
2.
Fold the USB cable inside the case
as shown.
3.
Attach the drive and case assembly
to the left underside of the
instrument, using the included four
screws (4mm x 10mm).
4.
Connect the USB cable to the USB
[TO DEVICE] terminal.
125
CLP-380 Owner's Manual