Chapter Three Configuation Using The Local Console; The Main Control Portal; Layout; Di/Do - Vivotek ND9541P User Manual

VIVOTEK - Built with Reliability
Chapter Three
Configuation Using the Local Console

The Main Control Portal

3-1. Layout

Move your mouse cursor across the screen to display the portal.
By default, 5 typical layouts are provided for the user. They include: 1x1, 2x2,
3V, 3x3, 4x4, 1P+3, 1M+5, 1P+6, 2P+3, and 1M+12. 1x1, 3V, 2x2, 3x3, 1P+3,
2P+3,1M+5, 1P+6 , and 1M+31. If you select the single view layout, the rotation
button
the display of different cameras by every 10 seconds. The rotation speed is
configurable via Settings > System > Display.

3-2. DI/DO

54 - User's Manual
will appear. Click the rotation button below to let the system swap
Click on the DI/DO button to display the full list of all DI and DO
signals (whether they are connected or not) from all cameras in the
configuration. If a digital input signal is triggered, e.g., the DI-4 on the
left, its indicator will turn solid white.