Vivotek ND9541P User Manual page 24

VIVOTEK - Built with Reliability
ND9541P supports 32 channel recording, and the onboard 16 PoE ports supply power and
data connectivity for 16 cameras. The NET2 GbE port should be used to connect another 16
cameras in a local network via a PoE switch or mid span.
ND9441P
LAN
#1 ~ 16
PoE
USB 3.0
IMPORTANT:
Note that you should not connect NET1 and NET2 into the same subnet. By default, the NET1
interface should be connected to a network consisting of multiple subnets. Configure the de-
fault gateway configuration on NET1. If DHCP is available, gateway configuration will not be
necessary.
In a single-subnet network managed by a gateway, you can configure the default gateway con-
figuration on NET2. NET2 is interfaced with the onboard PoE ports, while NET1 is not. Con-
nect NET2 to such network. NET1 will then be left unused.
24 - User's Manual
LAN/WAN
NET1
NET2
Camera 01
Camera 02 Camera 03
Camera 05 Camera 06
Camera 04
Camera 07 Camera 08
Camera 09
ND9441P
AC100~240V
50/60Hz, ≤295W