Settings - Camera - Motion Detection - Vivotek ND9541P User Manual

3-5-7. Settings - Camera - Motion Detection

Motion Detection
To set up a detection window:
1. Select a camera by a single click.
2. Use the PTZ panel to move to a field of view where you want to place a detection
window.
3. Click and drag to draw a rectangular detection window.
4. Pull the detection area level up to a preferred position. An object must be larger
than the detection area to trigger an alarm.
5. Select a Sensitivity level using the slide bar.
6. Click the Apply button for the configuration to take effect.
The sample screen shows a connection with a speed dome camera.
If you already configured Preset positions, expand its menu and click on the
presets to move to a position.
VIVOTEK - Built with Reliability
1
Detection window
4
3
5
2
6
User's Manual - 105