Table of Contents
Advertisement
VIVOTEK - Built with Reliability
Chapter Three
Configuation Using the Local Console
The Main Control Portal
3-1. Layout
Move your mouse cursor across the screen to display the portal.
The first functional button is Layout. You can select the 1x1, 1x3, 2x2, 3x3, 1+5,
1+3, 1+1+3, or 1+3+3 layout as the screen display. If you select the single view
layout, the rotation button
let the system swap the display of different cameras by every 5 seconds. The
rotation speed is configurable via Settings > System > Display.
3-2. DI/DO
34 - User's Manual
will appear. Click the rotation button below to
Click on the DI/Do button to display the full list all DI and DO
signals (whether they are connected or not) from all cameras in the
configuration. If a digital input signal is triggered, e.g., the DI-4 on the
left, its indicator will turn solid white.
Advertisement
Table of Contents
