Vivotek ND9541P User Manual page 25

ND9541, ND9441
LAN/WAN
USB 3.0
1. Connect to a monitor using an HDMI cable. VGA is also supported.
2. Connect CAT5e or better-quality Ethernet cable to the GbE Ethernet ports. IP cameras are
connected via an Ethernet switch or PoE switches.
3. Connect USB devices such as, mouse, keyboard, USB optical drive, or USB thumb drive (for-
matted in FAT format), joystick, or UPS.
4. Connect external devices, such as sensors, relays, or alarms to the terminal block.
5. Connect the power adaptor to the power mains and the system.
VIVOTEK - Built with Reliability
Camera 01 Camera 03
Camera 02
Camera 05 Camera 06
Camera 04
Camera 08
Camera 07 Camera 09
AC100~240V
50/60Hz, 2-1A
User's Manual - 25