Settings - Camera - Port Forwarding - Vivotek ND9541P User Manual

VIVOTEK - Built with Reliability

3-5-9. Settings - Camera - Port forwarding

You can associate an external port number to the cameras managed by the NVR. You can then
configure the router, virtual server or firewall, so that the router can forward any data coming into
a pre-configured port number to a network camera on the private network, and allow data from
the camera to be transmitted to the outside of the network over the same path.
From
122.146.57.120:8000
122.146.57.120:8001
...
When properly configured, you can access a camera behind the router using the HTTP request
such as: http://122.146.57.120:61001
If you change the port numbers on the Network configuration page, please open the ports ac-
cordingly on your router. For example, you can open a management session to your router to
configure access through the router to the camera within your local network. Please consult your
network administrator for router configuration if you have troubles with the configuration.
NOTE:
1. This port forwarding feature does not support legacy cameras connected via the RTSP meth-
od.
2. The configurable range of port numbers is between 61001 ~ 61128.
108 - User's Manual
Forward to
192.168.2.10:80
192.168.2.11:80
...