Safety - Vivotek ND9541P User Manual

● PTZ Support
● Snapshot / Export Media
● Digital zoom Video Control
● VIVOCloud for effortless access from cell phones using a QR code
● Terminal block pins for DI/DO and RS-485 connection.
● Configuration Backup / Restore
● Compatible with VIVOTEK VAST Central Management Software*
● Integration with VIVOTEK Network Cameras
● VIVOTEK iViewer Support (iOS/Android cellphone/hand-held devices)
*The VIVOTEK VAST Central Management Software is not included in the package.

Safety

 Connect the system to an earthed main power outlet.
 Never open the housing of the power supply unit.
 Install and operate the system only in a dry, weather-proof location.
 Observe the following safety factors:
Is there visible damage to the system or power cord?
•
Is the system operating correctly?
•
Has the system been exposed to rain or moisture?
•
Has the system been in a long storage under harsh conditions or exposed to
•
unconforming stress?
 The relevant electrical engineering regulations must be complied with at all times during
installation.
 Ensure that all maintenance and repair work is handled by qualified personnel such as
electrical engineers or network specialists.
 Read this manual before installing or operating the system. The documentation contains
important safety instructions about permitted uses.
 The rated AC input is: 100-240V~ 6-3A, 60-50Hz; the max. consumption: 295W
ND9441, ND9541: DC input - 56V, 2.32A, max power consumption: 76W.
 If a fault occurs, disconnect the power cord from the power supply.
 Do not install the system close to heaters or other heat sources. Avoid locations with direct
sunlight.
 All ventilation openings must not be blocked.
 Use only the cables shipped with system or use appropriate cables that can withstand elec-
tromagnetic interference.
VIVOTEK - Built with Reliability
User's Manual - 11